Roving Networks Bluetooth Serial Adapter User's Guide download pdf (Page 23)

RN Commands Version 4.25, 11/1/2007 Page 23 of 25

809 University Avenue • Los Gatos, CA 95032 • 1-(408) 395-6539 • [email protected]

www.rovingnetworks.com

10 FireFly Configuration Switches

1- FACTORY DEFAULTS- Set this switch ON, power up unit, and toggle the switch from ON to OFF 3 times to return the unit

to factory settings.

2-AUTO DISCOVER MODE – In Slave mode, sets a special class of device which is used by a remote Master to auto connect.

IF Switch 3 also SET, the device performs a search, stores, and connects to a remote slave which has this switch 2 set .

3- AUTO MASTER MODE- BluePort acts as master, auto-connect to a stored remote address. First set the BT address of the

device to connect to using the SR command. or, have BluePort auto discover and connect by via Switch 3 AND Switch 2.

4- DEFAULT BAUD RATE - OFF = 115K (factory setting), ON = 9600. Overridden by software configuration.

Instant Cable Replacement Example

MASTER

SLAVE

1. Set switches as shown above.

2. Power up both devices

3. Master finds and store slave address, and auto connects.

4. Set Switch 2 on both Master and Slave back to OFF (so that they don’t try to re-pair each time

power is cycled).

BOTTOM SIDE

4- Default baud(9600/ 115k)

3- AUTO MASTER

2 - AUTO DISCOVER

–

FACTO

RY DEFAULTS

OFF

BOTTOM SIDE

4- Default baud(9600/ 115k)

3- AUTO MASTER

2 - AUTO DISCOVER

–

FACTORY DEFAULTS

OFF

BOTTOM SIDE

4- Default baud(9600/ 115k)

3- AUTO MASTER

2 - AUTO DISCOVER

–

FACTORY DEFAULTS

OFF

1 2 ... 18 19 20 21 22 23 24 25

No comments

Roving Networks Bluetooth Serial Adapter User's Guide Page 23